1.Basic product information
 Ultra-intelligent wind and solar hybrid controller is a new generation of high-performance new energy application control equipment designed on the basis of our ultra-high-performance controllers, condensing many years of application experience (e.g., waterproof, dust-proof, salt spray, operating wiring errors, wind turbine wind limit control, energy management, etc.) Whether it is used for charging control, or street light control, it is done to the ultimate extent. In order to match the various applications, the controller adopts a layered, building block structure, all the functions can be based on the actual application, with different functional board composition, easy to quickly customize suitable for the application.
2.Performance features
Waterproof
  Line board three-proof processing, layered structure design, even if a small amount of water, will not damage the device.

 

RS232 communication
   RS232 communication is standard, which is convenient to do monitoring with computer software. (RS485, short-distance wireless optional), the use of USB to RS232 components, more convenient and computer data exchange (USB interface computer can be used).

 

 safety wiring
    The wiring terminal adopts injection molding technology, which will not occur wiring short circuit, touching the line phenomenon, so that customers can operate more safely.
Reverse battery connection will be automatically alarmed and prompted
Continuous reverse connection of the battery input will not be damaged, and there is a beeping alarm. It avoids equipment damage and fire due to wiring error, and also protects the

 

battery better.
   Reverse connection of photovoltaic panels will automatically alarm
PV panel input terminal continuous reverse connection will not be damaged, and there is a beeping alarm prompts. It will not cause wiring errors especially during construction at night (Note: Reverse connection detection during wiring at night requires manual key intervention).
Continuous short circuit output protection

 

   The discharge output has continuous short-circuit output protection and over-current protection. It recovers by itself after the abnormality is eliminated. It avoids damage to the controller or causing fire due to the failure of electric equipment (especially short circuit).
Patented Fan Steady Speed Power Generation Control Technology
   

   The patented fan steady speed power generation control method can make the fan not over speed operation, in the strong wind, the fan can be limited to a set speed under the continuous power generation, to avoid due to the strong wind caused by the speed of the fan under the direct braking. This greatly improves the power generation of the fan and keeps the

 

fan running safely.
   Patented fan stall current limiting power generation control technology
The patented fan stall current limiting control method enables the fan not to run on overcurrent and protects the expensive generator from being damaged by overcurrent-induced heating.

 

Turbine Input MPPT Generation Technology (Boost Type)
   The controller can provide automatic turbine input maximum power tracking mode, or 5-segment matching curve input configuration mode (input speed versus input current; or input voltage versus input current curve), which can maximize the turbine low wind speed and

 

efficient power generation.
   Supports multiple output mode selection
The controller provides a variety of output modes to choose from (light control, time control, morning light, PWM dimming, reverse) to easily fit a variety of applications.
Statistics of accumulated power generation, remaining power, rotation speed, current, temperature, etc.

 

The controller screen has conventional fan, photovoltaic, battery, output current, voltage, power display, but also fan, photovoltaic cumulative power generation display, and battery remaining power display, fan speed, unloading current display. Temperature display of the controller. 

 

Alarm function when controller terminals are placed upwards
   After the controller terminals are placed upwards, the alarm will be activated so that the customer can use it according to the correct installation direction, which avoids the possibility of damage to the controller when it is used in the open air or due to the weather, the surface of the wires is dewy and the rain water is directly guided along the wires to the inside of the controller, which is then damaged by a large amount of accumulated water.