Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The wind turbine controller can successfully stop both the threat posed by severe winds to the wind turbine as well as the loss of control that occurs when the wind speed is too high. It is specifically made for controlling wind turbines and charging batteries, which can significantly increase the effectiveness of wind power generation.
Hot sale 12V 24V 48V horizontal axis wind turbine 1000W 2000W wind turbine generator kit with MPPT controller
The wind turbine controller can effectively prevent the loss of control when the wind speed is too fast, and the danger to the wind turbine is caused by a strong wind.
The features of Hot sale 12V 24V 48V horizontal axis wind turbine 1000W 2000W wind turbine generator kit with MPPT controller
In the case of strong wind and strong wind, the controller outputs a constant voltage to provide a DC constant voltage power supply to ensure the normal operation of the inverter.
When the grid-connected inverter is disconnected, the controller outputs a constant voltage and waits for the inverter to resume work.
When the power grid fails, the controller will automatically start the three-phase unloading, and the inverter will stop outputting to the grid. When the grid power resumes power supply, the controller stops the three-phase unloading, and the inverter resumes the power supply.
According to the type of wind turbine, the controller can add various brake control functions such as mechanical yaw control, mechanical folding tail control, mechanical brake, hydraulic brake, electromagnetic brake, etc.
There is a lightning protector inside the controller. Limit the instantaneous overvoltage that enters the power line of the wind turbine within the voltage range that the equipment or system can withstand, or drain the strong lightning current into the ground to protect the equipment from being damaged by lightning.
The controller has an emergency stop switch. In case of emergency, press the emergency stop button on the front panel, and all power supply of the controller will be cut off, and the wind turbine will brake immediately (three-phase unloading).
The controller has a manual three-phase unloading switch, which can be used by the user according to the situation. With this switch, the wind turbine will be forced to brake (three-phase unloading).