Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
Our brand-new, three-bladed, 24- and 48-volt household wind turbine has a low starting speed, strong wind energy utilization, low vibration during operation, and high efficiency. Carbon fiber and nylon are used to make it. The length of the blades increases with the amount of kinetic energy and power generated. Nylon is a flexible, waterproof, and corrosion-resistant material.
Factory new wind turbine 24v 48v 3000w with 3 blades for home use free PWM controller
Our brand-new wind turbine, which is 24 volts and 48 volts and has three blades for household usage, starts with low speed, high wind energy utilization, minimal vibration during operation, and high efficiency. It is constructed of nylon and carbon fiber. The more kinetic energy and power produced by the blades, the longer they are. The material nylon is lightweight, corrosion-proof, and waterproof.
The features of Factory new wind turbine 24v 48v 3000w with 3 blades for home use free PWM controller
High efficiency
1. A permanent magnet synchronous motor with three phases. Compact and effective ac generator with a powerful permanent NdFeB magnet.
2. A completely built-in voltage regulator that turns off on its own once the battery is fully charged.
3. An MPPT intelligent microprocessor, which can efficiently change current and voltage, manages the fan.
4. The wind turbine's ability to start in a breeze is effectively guaranteed by the special magnetic circuit design, which reduces the beginning torque to an extremely low level.
High quality
1. Stainless steel and high-grade aluminum are used only in the construction of wind turbines. In addition to being lightweight and modest in size, it also has a compact shape.
2. The blade material is an anti-UV, anti-corrosion, high-strength plastic with 30% carbon fiber that is both elegant and strong.
3. The wind turbine's surface is coated using a unique technique that offers great resistance to oxidation and corrosion in challenging environments as well as corrosion, water, and sand resistance.
Easy installation
1. Insert the wind turbine's tower within the reducing joint after nesting the black leather cushion there. securing and screwing together the decreasing joint's cover. making use of a hex key to tighten the screws.
2. The wind turbine's three wires are attached to the transmission line; the tape at the connection end is 100 mm long, and each pair of wires is at least 30 mm in diameter.
3. Before wiring, connect the battery to the controller and the connection from the wind turbine to it.