Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
220 volt off grid hybrid pure sine wave inverter for solar and wind system
A pure sine wave inverter is a type of inverter, which is a power electronic device that converts DC power into AC power efficiently. The process of a pure sine wave inverter is diametrically opposed to that of a converter, which primarily completes the inverter task by turning it on and off according to specific rules via the power semiconductor device. Pure sine wave inverters are commonly used in industrial electronics, semiconductor device technology, and other fields.
A pure sine wave inverter is a common inverter, a power electronic device that can efficiently convert DC power into AC power. The process of the pure sine wave inverter is opposite to that of the converter, which mainly completes the inverter task by turning it on and off according to specific rules through the power semiconductor device. Pure sine wave inverters are widely used in industrial electronics technology, semiconductor device technology, and so on.
The Feature of Pure Sine Wave Inverter for Solar System Wind Generator system use off grid single phase 220v
1.This Pure Sine Wave Inverter is a combination of an inverter, battery charger, and AC auto-transfer switch. GFCI socket, low frequency, low Idle Current, BTS cable, remote control;
2.Adjustable Charging Current: The max charge current can be adjusted from 0%-100% via a liner switch at the right of the battery type selector. This will be helpful if you are using our powerful charger on a small capacity battery bank. The liner switch can effectively reduce the max charging current to 20% of its peak. Choosing “0” in the battery type selector will disable the charging function.
3.AC/Battery Priority: Our power inverter is designed with AC priority by default, when AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. The inverter can be easily customized to Battery priority via a DIP switch, when you choose battery priority, the inverter will invert from the battery despite the AC input. It will efficiently draw 24Vdc power from the battery to power up the load with 120/240Vac
4.Auto Gen Start: The power inverter can be customized to start up a generator when the battery voltage goes low. When the inverter goes to a low battery alarm, it can send a signal to start a generator and turn the generator off after battery charging is finished. The auto-gen starts feature will only work with generators designed to work with this feature.
5.Protections: AC input over voltage protection/AC Input low voltage protection/Low battery alarm/Hign battery alarm/Over temperature protection/Overload protection/Short circuit protection(1s after fault)/Back feeding protection
