Horizontal axis wind turbine

Horizontal axis wind turbine

(63)

Wind turbines have become a common sight in many parts of the world, as countries increasingly look to renewable energy sources to reduce their carbon footprint. Horizontal axis wind turbines (HAWTs) are one of the most popular types of wind turbines used today.

Introduction of our HAWTS
It is a type of wind turbine where the rotor shaft and the generator shaft are horizontal to the ground. HAWTs typically have two or three blades that rotate around a horizontal axis to generate electricity. The rotor is mounted on a tower, which can range in height from 20 to 100 meters.

Advantages of Horizontal Axis Wind Turbines
1. High Efficiency: They are designed to be highly efficient, and they can capture a large amount of energy from the wind. This makes them a cost-effective source of renewable energy.
2. Mature Technology: HAWTs have been in use for several decades, and the technology is well-established. This means that the maintenance and operation of HAWTs are relatively straightforward.
3. Scalability: HAWTs can be built in a range of sizes, from small turbines that can power a single home to large-scale turbines that can power entire cities.
4. Location: HAWTs can be located in a range of environments, from rural areas to offshore locations.

The shapes of Horizontal Axis Wind Turbines
They come in a variety of shapes and sizes, but the most common design is the three-bladed, upwind, horizontal-axis turbine. The blades of a HAWT are designed to be aerodynamic and are typically between 30 and 50 meters long, although some blades can be as long as 80 meters.
And the shape of the blades determines how efficiently the turbine can capture the energy in the wind. The blades are typically twisted along their length, with the twist angle increasing from the base to the tip. This allows the blade to maintain a constant angle of attack along its length, even as the speed of the wind changes.

Our special Horizontal Axis Wind Turbines here.
The shape and design of a HAWT can have a significant impact on its efficiency, noise level, and visual impact. 
Our 6-bladed HAWTs tend to produce less noise than turbines with fewer blades, and each blade generates less turbulence as it moves through the air, resulting in quieter operation.
Improved orange sunflower-shaped HAWTs are designed to look sleeker and make them more aesthetically pleasing and less likely to cause visual pollution in landscapes and urban areas.

Horizontal axis wind turbines are a mature and well-established technology that offers a range of advantages as a source of renewable energy. And you can also custom HAWTs from us.

Complete horizontal shaft 2kw 3kw 5kw 10kw turbine wind power generation grid-connected/off-grid system customization

Professional custom wind turbine system/wind-wind complementary system

Contact us

Professional design 20kw high power grid-connected hybrid solar wind power system program customization

The 20kw wind-solar Complementary solution is a solution that addresses energy shortages or shortages in both urban and rural areas. Through the common utilization of natural resources and the environment, the system realizes the complementarity of solar energy and wind energy, thus realizing the efficient utilization and synergistic efficiency of energy

Contact us

A complete 10kw on/off grid hybrid solar wind generator customized solution is provided for home use

The 10KW wind-solar complementing system is a customized off-grid solution that is suitable for areas where energy is in short supply or in short supply. The system mainly realizes the complementarity of solar energy and wind energy through the common utilization of natural resources and environment, so as to realize the efficient utilization of energy and achieve a synergistic effect.

Contact us

Professionally customized 5kw grid-connected wind generator system scheme to support the original solar energy system

The formulation of a full set of supporting schemes for 5kw wind power generation system, including the combination of wind generator host, tower, controller, inverter, wire and other accessories

Contact us

Customized scheme horizontal axis more than 15kw grid-connected new energy hybrid solar wind turbines

Professional custom 15kw wind turbine and solar grid system

Contact us

600/800 watt permanent magnet motor horizontal axis wind turbine generator 12V 24V

Wind generator blades are made of reinforced fiber nylon, which is more durable and has a strong anti-wind ability. High wind energy utilization due to optimized aerodynamic shape and structural design. Furthermore, our wind turbine uses a patented permanent magnet rotor alternator with a unique stator design to efficiently reduce generator resistance torque.

Contact us

Low frequency noise horizontal axis wind turbine generator 5kw 48v 96v 220v

An innovative process is used to coat the surface of the 5KW Horizontal Axis Wind Turbine 48V Low Noise Alternative Energy System/Wind Generator, providing excellent corrosion resistance, water resistance, sand resistance, as well as excellent resistance to oxidation and corrosion under any harsh conditions.

Contact us

Factory wholesale 400w 600w 800w 12v 24v horizontal axis wind turbine

This Cheap 12v 24v horizontal axis wind turbine 400w wind turbine generator is easy to install, operate, and repair thanks to its humanized design. frequently used for charging mobile homes, yachts, terraces, and other devices.

Contact us

6 blades wind turbine generator 800w 12v/24v for the home

The six-bladed, three-phase AC permanent magnet synchronous generator of the New Design Wind Turbine Wind Generator 800W 6blades 12V/24V For Home is easy to install and maintain. This wind turbine motor can be used to generate wind power indoors or outside, powering things like street lighting, boats, pavilions, green windmills, power plants, landscape islands, and industrial energy sources.

Contact us

1kw 2kw horizontal axial wind turbine generator with 12V 24V 48V MPPT charge controller

The wind turbine controller can successfully stop both the threat posed by severe winds to the wind turbine as well as the loss of control that occurs when the wind speed is too high. It is specifically made for controlling wind turbines and charging batteries, which can significantly increase the effectiveness of wind power generation.

Contact us

Wholesale 3KW 5KW 48V horizontal axis wind turbine for sale

$ 440.00

A three-phase AC permanent magnet synchronous generator, a tiny, effective alternator, and a high-performance rare earth NdFeB permanent magnet alternator are all used in this wind turbine motor. Because of its low beginning wind speed, low noise level, and beautiful design, this wind turbine is simple to erect. It can be rapidly and simply installed, and it is portable.

Contact us

3000w wind turbine with 12v 24v 48v 3 blades PWM charge controller

Our brand-new, three-bladed, 24- and 48-volt household wind turbine has a low starting speed, strong wind energy utilization, low vibration during operation, and high efficiency. Carbon fiber and nylon are used to make it. The length of the blades increases with the amount of kinetic energy and power generated. Nylon is a flexible, waterproof, and corrosion-resistant material.

Contact us
Contact us
Name

Name can't be empty

* Email

Email can't be empty

Phone

Phone can't be empty

Company

Company can't be empty

* Do you have a solar system?

Do you have a solar system? can't be empty

* Do you purchase wind turbines for personal use or for resale?

Do you purchase wind turbines for personal use or for resale? can't be empty

* Are you interested in wind turbines

Are you interested in wind turbines can't be empty

* How much power do you need for a wind turbine, 1kw, 2kw, 3kw, 5kw, 10kw or something else?

How much power do you need for a wind turbine, 1kw, 2kw, 3kw, 5kw, 10kw or something else? can't be empty

* Message

Message can't be empty

Submit
PRODUCT TAGS