Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
Wind turbines have become a common sight in many parts of the world, as countries increasingly look to renewable energy sources to reduce their carbon footprint. Horizontal axis wind turbines (HAWTs) are one of the most popular types of wind turbines used today.
Introduction of our HAWTS
It is a type of wind turbine where the rotor shaft and the generator shaft are horizontal to the ground. HAWTs typically have two or three blades that rotate around a horizontal axis to generate electricity. The rotor is mounted on a tower, which can range in height from 20 to 100 meters.
Advantages of Horizontal Axis Wind Turbines
1. High Efficiency: They are designed to be highly efficient, and they can capture a large amount of energy from the wind. This makes them a cost-effective source of renewable energy.
2. Mature Technology: HAWTs have been in use for several decades, and the technology is well-established. This means that the maintenance and operation of HAWTs are relatively straightforward.
3. Scalability: HAWTs can be built in a range of sizes, from small turbines that can power a single home to large-scale turbines that can power entire cities.
4. Location: HAWTs can be located in a range of environments, from rural areas to offshore locations.
The shapes of Horizontal Axis Wind Turbines
They come in a variety of shapes and sizes, but the most common design is the three-bladed, upwind, horizontal-axis turbine. The blades of a HAWT are designed to be aerodynamic and are typically between 30 and 50 meters long, although some blades can be as long as 80 meters.
And the shape of the blades determines how efficiently the turbine can capture the energy in the wind. The blades are typically twisted along their length, with the twist angle increasing from the base to the tip. This allows the blade to maintain a constant angle of attack along its length, even as the speed of the wind changes.
Our special Horizontal Axis Wind Turbines here.
The shape and design of a HAWT can have a significant impact on its efficiency, noise level, and visual impact.
Our 6-bladed HAWTs tend to produce less noise than turbines with fewer blades, and each blade generates less turbulence as it moves through the air, resulting in quieter operation.
Improved orange sunflower-shaped HAWTs are designed to look sleeker and make them more aesthetically pleasing and less likely to cause visual pollution in landscapes and urban areas.
Horizontal axis wind turbines are a mature and well-established technology that offers a range of advantages as a source of renewable energy. And you can also custom HAWTs from us.
Factory custom 100w to 100kw wind turbine, professional custom home wind turbine off-grid system, wind-wind complementary off-grid system
Our brand-new, three-bladed, 24- and 48-volt household wind turbine has a low starting speed, strong wind energy utilization, low vibration during operation, and high efficiency. Carbon fiber and nylon are used to make it. The length of the blades increases with the amount of kinetic energy and power generated. Nylon is a flexible, waterproof, and corrosion-resistant material.
The wind turbine controller can successfully stop both the threat posed by severe winds to the wind turbine as well as the loss of control that occurs when the wind speed is too high. It is specifically made for controlling wind turbines and charging batteries, which can significantly increase the effectiveness of wind power generation.
An innovative process is used to coat the surface of the 5KW Horizontal Axis Wind Turbine 48V Low Noise Alternative Energy System/Wind Generator, providing excellent corrosion resistance, water resistance, sand resistance, as well as excellent resistance to oxidation and corrosion under any harsh conditions.
Professional custom 15kw wind turbine and solar grid system
The formulation of a full set of supporting schemes for 5kw wind power generation system, including the combination of wind generator host, tower, controller, inverter, wire and other accessories
The 10KW wind-solar complementing system is a customized off-grid solution that is suitable for areas where energy is in short supply or in short supply. The system mainly realizes the complementarity of solar energy and wind energy through the common utilization of natural resources and environment, so as to realize the efficient utilization of energy and achieve a synergistic effect.
The 20kw wind-solar Complementary solution is a solution that addresses energy shortages or shortages in both urban and rural areas. Through the common utilization of natural resources and the environment, the system realizes the complementarity of solar energy and wind energy, thus realizing the efficient utilization and synergistic efficiency of energy
Professional custom wind turbine system/wind-wind complementary system
48v-380v horizontal axis wind turbine 1KW-50KW wind turbine generator is easy to install, operate, and repair thanks to its humanized design. frequently used for charging mobile homes, yachts, terraces, and other devices.
48v-380v horizontal axis wind turbine 1KW-50KW wind turbine generator is easy to install, operate, and repair thanks to its humanized design. frequently used for charging mobile homes, yachts, terraces, and other devices.